Image

X-Frame gets commercialisation boost

28 November 2019

Clip-together modular building design can be rapidly assembled, disassembled and reused, eliminating waste during a building’s lifecycle

Victoria University of Wellington PhD candidate Ged Finch is fast tracking the commercialisation of his X-Frame structural frame solution for waste free buildings with support from the KiwiNet Emerging Innovator Programme. The game-changing framing system can be disassembled and re-used at the end of a building’s useful life.

Finch’s design, a self-braced interlocking wood design which clips together eliminating the need for single-use fixings, has the potential to eliminate waste and reduce the amount of raw materials being used by the building industry. Approximately half of all New Zealand’s waste—about 1.6 million tonnes every year—is generated by the construction sector.

“The current widespread use of adhesive-based fixings and single-life materials means that building a single new home will create about four tonnes of waste during construction, and even more when it’s eventually demolished and taken to the landfill,” says Finch. Finch, who has been working with Viclink, Victoria University of Wellington’s commercialisation office, also secured a place on KiwiNet’s Emerging Innovator programme to help commercialise the green architectural solution.

Every single component of Finch’s X-Frame design, cut by a computer-controlled router, can be disassembled and reused, so no waste is produced at any stage of a building’s lifecycle. The clip-together design allows any type of structure—floors, walls, ceilings—to be rapidly assembled and disassembled many times over, using unskilled labour and a bare minimum of tools, akin to flat-pack furniture. Adding doors or windows at a later stage is simple, and when kids leave home: “they could literally take their rooms with them, as our modular design also clips onto standard framing.”

Dr James Hutchinson, CEO of KiwiNet, says: “Ged’s vision is to transition the building sector from a linear (take, make, dispose) economy to a circular economy—where materials are reused in endless cycles. His approach could set a new benchmark for sustainable design, and it makes great commercial sense. KiwiNet’s Investment Committee saw an opportunity to support Ged with expertise, networks and funding to do specialised work required to demonstrate his ideas at scale, and to assist with the commercialisation pathway from concept to new architectural solution.”

Finch is currently building a small (10m2) prefabricated prototype dwelling in Auckland to demonstrate his ideas at scale and to inform market viability. He believes the completed prototype will be New Zealand’s most sophisticated ‘circular’ building.

Finch says, “This prototype build is a major step as it is the first time we will have built the entire wall system with cladding, cavity battens, insulation and an internal lining. Unitec Institute of Technology’s School of Architecture have helped out by providing robotic fabrication facilities to create the frame – which means we’ll be able to have the entire building water-tight in less than one week on-site. We’re cladding the assembled X-Frame in an entirely reusable, chemical free external cladding system centered around a naturally preserved timber product being developed by Abodo Wood Ltd.”

Source: KiwiNet

Photo: Ged Finh to Victoria University of Wellington

Read More
Image

FIEA wood residues conference: time for action

Low carbon economies, extreme weather events, and building resilient domestic supply chains are critical issues in 2024 and beyond. In New Zealand, this has created opportunities for the forestry sector, including significant investments in forest residues. Harvesting regulations are mandating more wood be collected from the forest ...
Read more
Image

Kiwi bird surprises at Rosvall Sawmill

Workers at Rosvall Sawmill near Whangārei, New Zealand, had an unexpected visitor, a fully grown kiwi bird. The bird casually strolled into the mill early one Monday morning, and spent a few hours exploring the premises before it found a ...
Read more
Image

Major upgrades to Grafton timber factory

Big River Group, a major supplier of timber products in Australia, completed a significant upgrade to their Grafton, NSW timber factory. The A$22 million project, funded partly by the government’s Bushfire Local Economic Recovery Fund, aims to improve the sustainable ...
Read more
Image

The future of forestry in Australia – hear the discussion

While it is a long-running debate, trees are not just part of the forest, but a valuable part of farms. It’s the future of forestry in Australia, according to a recent discussion on the ABC Listen podcast. There are many groups ...
Read more
Image

Smart factory assessment available in NZ

Are you ready to embrace the future of manufacturing? Apply for one of Callaghan Innovation’s last few fully-funded Smart Factory Assessments, valued at $10,000. A Smart Factory Assessment allows you to start, scale and sustain your Industry 4.0 transformation journeys through ...
Read more
Image

PF Olsen NZ log market report – April 2024

Market Summary At Wharf Gate (AWG) log prices across New Zealand dropped an average of 17% in April. April AWG log prices are about 15% below the two-year average. CFR prices for A grade logs in China have bottomed in ...
Read more
Image

Carbon accounting roadmap for Australian building industry

WoodSolutions new EPD Database provides carbon accounting roadmap for building industry There is considerable discussion among governmental bodies, regulatory agencies, sustainability rating systems, and professionals within the industry regarding the emergence of ‘zero-carbon’ initiatives. These initiatives carry significant implications for ...
Read more
Image

50 Years & Growing: The History of Pan Pac vol 2

An icon in New Zealand’s Hawke’s Bay region for half a century, Pan Pac Forest Products has released ‘50 Years & Growing: The History of Pan Pac, Vol. II‘, which details the company’s last 30 years. It’s been a many years ...
Read more
Image

New Hyne Timber Tumbarumba Mill expansion

The Hyne Timber Tumbarumba Mill has commenced construction on the largest, new site asset since the Mill was purchased and re-developed in 2001. The new storage facility will be 4700m2 with the capacity to store 4000m3 timber known in the process ...
Read more