featured image for World-leading gene editing research

World-leading gene editing research

2 June 2025

Scion has launched the world’s first field trial of gene-edited conifer as part of research aimed at improving wood quality and producing materials to support New Zealand’s bioeconomy.

The Crown Research Institute has developed and implemented an advanced gene-editing technique known as CRISPR that lets scientists turn off a specific gene within the pine’s complex genome. This helps them understand what that gene does – which in turn builds understanding of how wood develops.

Two sets of trees have been planted, each with a separate gene turned off. This aims to enhance timber quality and improve the process of converting wood into fibre (pulping) and sustainable chemical feedstocks for the bioeconomy. One of these genes is involved in the synthesis of hemicellulose, a renewable biopolymer (a molecule produced by plants with many versatile, high-value applications.

The other is involved in the development of compression wood, which forms on leaning or bent stems to straighten them up. Compression wood behaves differently from normal wood during timber processing, leading to issues such as warping and reduced strength, as well as making the extraction of fibre and chemicals more difficult.

The trees in this trial were initially cultivated in a contained greenhouse, where their wood underwent a comprehensive analysis. This research yielded unique and fundamental insights into the mechanisms of cell wall formation. The trees have subsequently been planted in Scion’s Environment Protection Agency-approved GMO field test containment facility to help scientists better understand how they perform under real-world conditions and to collect sufficient wood for relevant biomechanical experiments.

Scion senior scientist Glenn Thorlby says the trees’ growth and development continue to be meticulously monitored. “This research will allow us to produce trees that, with optimised wood properties, will support the export of high-value timber and the biomass needed to replace petrochemicals as New Zealand transitions to a low-emissions sustainable bioeconomy.

Additionally, Scion has also developed gene-edited Douglas-fir to create sterile trees that could be planted without the risk of exacerbating New Zealand’s wilding pine issue. These sterile trees would potentially act as a form of biocontrol for future genetically modified trees.

“This will enable Douglas-fir to grow normally but not reproduce, helping limit its spread,” Glenn says. “By targeting reproductive genes, we offer a potential solution to New Zealand’s wilding pine problem.”

Wilding pines occur when forest species such as Douglas-fir spread beyond planted areas, impacting native ecosystems and landscapes across New Zealand.

More >>

Source & image credit: Scion

More Posts

Image

ForestTECH 2027 programmes released: AI, autonomous systems, & precision silviculture

Innovatek has officially released the full conference programmes for ForestTECH 2027, Australasia’s premier event series dedicated to forest resource management, remote sensing, GIS, precision silviculture, and operational technology. Celebrating its 20th year, the 2027 series will run on 9-10 March ...
Read more
Image

Drone project to tackle wasps and hornet nests takes flight

The Bioeconomy Science Institute Maiangi Taiao is exploring cost-effective drone systems to make nest removal safer, faster and easier in high-risk locations, such as tall trees, cliff faces, and steep gullies. The project, funded by Better Border Biosecurity (B3), begins ...
Read more
Image

Finland’s forest database expands to cover 8.5 billion trees – one of the largest in the world

The forest database, which began as a research experiment, now includes data on 8.5 billion trees over an area of 29 million hectares. The database, which has grown to cover almost all of Finland, is a demonstration that at-scale production ...
Read more
Image

New program to strengthen forest certification and auditing capability

A new training program aims to strengthen auditing capability across the forestry sector in Australia and New Zealand, helping forestry businesses build the expertise to navigate certification requirements, while expanding the pool of specialist auditors equipped to assess forest management practices ...
Read more
Image

Can exoskeletons ease silviculture work?

Pruning and planting are among the most physically demanding tasks in forestry. Workers spend long hours undertaking repetitive movements, working with their arms elevated, handling loads, and navigating challenging terrain. While these activities are fundamental to establishing and maintaining productive ...
Read more
Image

Global sustainability progress report

The International Council of Forest and Paper Associations (ICFPA) released its biennial Sustainability Progress Report which demonstrates progress in seven key areas of sustainability. The 2026 report also highlights the role the forest products sector can play in helping meet ...
Read more
Image

Study shows forest soils help offset methane emissions

Run over two years, the research looked at the methane uptake of soils in three planted forests – Orton Bradley Park and McLeans Island in Canterbury and Kaingaroa (New Zealand’s largest commercial pine plantation, in the Bay of Plenty) – ...
Read more
Image

Faster wood formation matters more than longer growing seasons in a warming climate

In non-tropical forests, cold winters hinder tree growth. There, climate warming prolongs the period during which trees absorb carbon through photosynthesis and store it in wood, known as the growing season. This could potentially mitigate further climate change as wood ...
Read more
Image

Beyond Woodchips: Australia’s hardwood plantation industry must innovate

For more than three decades, Australia’s hardwood plantation industry has been built on a simple but largely successful business model: growing world-class plantation fibre for export to Asia’s pulp mills. It has underpinned regional economies, attracted significant investment and established ...
Read more
Image

Free program to help SMEs advance AI and digital tech ideas in Queensland

The free eight-week online program, delivered by Australia’s national science agency, CSIRO, helps businesses turn early-stage ideas into actionable R&D plans while building connections with expert facilitators and researchers. Offered through the Queensland Government-funded Regional University Industry Collaboration (RUIC) program, ...
Read more
Image

Science safeguards NZ’s rarest ecosystems

Some of New Zealand’s most remarkable ecosystems are also among its rarest. Now, new research is aimed at helping councils and land managers better understand and protect them. Led by the Bioeconomy Science Institute Maiangi Taiao, the two-year project will develop practical ...
Read more
Image

AI identifies trees from the air as accurately as the human eye

A new remote sensing method identifies the species of individual trees with an accuracy of up to 90 percent. Detailed data on species makes forestry more efficient and improves the monitoring of biodiversity. Thanks to recent research on tree species ...
Read more
Image

Learning Through the Storm: Report released

The Top of the South Wood Council, with support from Te Uru Rākau – New Zealand Forest Service, has recently released  Learning Through the Storm, a report on the widespread windthrow caused by the severe storm events of 2025.  On July ...
Read more
Image

Carbon Forestry 2026 – Event Summary

The Carbon Forestry 2026 Conference, held in Rotorua on 4–5 August, brought together forest managers, investors, industry leaders and government representatives to explore some of the big questions facing carbon forestry. The Government’s commitment to forestry was reinforced by Climate ...
Read more
Image

Forestry confirms new training partnership with Competenz

New Zealand’s forestry sector has confirmed it will align its workplace vocational training with the new Engineering and Manufacturing Private Training Establishment (PTE), operating under Competenz. The decision follows extensive consultation with employers, contractors and training providers, led by the ...
Read more
Image

FPInnovations launch new forest seeding by drone trial

In the wake of wildfires, bringing affected areas back into production poses a major challenge, particularly in remote or hard-to-reach areas. In Canada, wildfires affect an average of 2.8 million hectares of forest each year, underscoring the importance of exploring innovative ...
Read more
Image

Extracting knowledge from a forest 3d digital twin using TreeTools SilvaCloud

Modern LiDAR technology is transforming the way we understand forests. With the introduction of sensors such as the DJI Zenmuse L3, collecting detailed three-dimensional information about forest structure, terrain, and vegetation has become more accessible than ever before. At Interpine, ...
Read more
Image

Opportunities for improved firefighter safety in Australia

John O’Donnell Opinion Piece Firefighter safety in Australia requires urgent attention as forest structure, fuel loads and fire behaviour shift toward more dangerous conditions. Past crown fires have created dense shrub dominated understoreys, abundant dead wood, reduced height stratification and ...
Read more
Image

Annual reputation survey provides insight into public perceptions of forestry

The results of the Forest Growers Levy Trust’s 7th annual Social Licence to Operate (SLO) survey have been published, continuing to build one of the sector’s most valuable long-term evidence bases for understanding how New Zealanders view forestry. After 7 years ...
Read more
Image

Revisiting a forest experiment that lay forgotten for 30 years

What’s the best way to manage a forest? Australians have argued about this for decades. The debate is often framed as binary: do we protect forests entirely, or harvest trees to support local economies and communities? The reality is more ...
Read more
Image

Hexagon acquires ITRES to expand the scope of airborne mapping

Hexagon has acquired ITRES, the Calgary-based provider of high-performance airborne hyperspectral and thermal imaging systems, strengthening its ability to deliver richer multi-sensor geospatial data for advanced airborne mapping and analysis. The acquisition unites two complementary portfolios under one provider. Hexagon ...
Read more