Image

Switching from coal to wood pellets – a Kiwi case study

8 June 2022

As part of the upcoming Residues to Revenues 2022 event, large scale industrial heat or energy users Fonterra, Danone and the Canterbury District Health board will be outlining their recent major plant conversions to wood residues. Probably more importantly for those supplying or co-ordinating the harvesting and delivery of residues from local forestry or wood processing operations, they’ll be outlining what specific requirements they have as end users of woody biomass.

The programme planned to run in Rotorua on 26-27 July looks like it will be a sell-out. Registrations if keen to register for the event can still be made on the event website. Note, for those outside New Zealand, on-line virtual registrations to the event can also be booked.

Background to case study.

On 25 August 2020, Fonterra took a bold step in the use of renewable energy for milk processing at its Te Awamutu factory. A NZ$12 million investment had been completed during the prior months with numerous COVID-19 restrictions in place, to convert the site’s 43-megawatt coal-fired boiler to an entirely sustainable, renewable source of energy – locally sourced wood pellets. EECA supported this project with co-funding of NZ$200,000 through the Technology Demonstration Fund.

For the next seven months of the milk processing season the boiler ran continuously on a steady supply of wood pellets, reliably delivering 43 megawatts of steam to process 2.8 million litres of milk every day.

Benefits and insights

By switching to wood pellets and modifying the boiler to do so, the boiler’s thermal efficiency improved by approximately 4 per cent and carbon emissions from the boiler have been cut by 98.4 per cent – a reduction of 89,000 tonnes of carbon dioxide equivalent per annum based on the first year of operations using wood pellets. Sulphur dioxide emissions have also been reduced.

Kevin Liao, Fonterra’s Senior Energy and Utilities Engineer, was the Commissioning Manager for the project. He says the project delivers on both environmental and financial outcomes.

“The use of wood pellets has cut both the rate and concentration of particulate emissions from the plant to less than 10 per cent of the currently consented levels, which materially improves air quality and should make reconsenting much simpler in the future,” he said. Additionally, whereas coal ash contains toxic chemicals, the organic wood pellets create an organic ash stream that is rich in potassium. “This potassium is a valuable nutrient used to make potash which we are assessing for it to be recycled as a natural fertiliser for use on Fonterra farms,” he said.

Kevin Liao said the Fonterra fuel switching project was a case study with much wider application for other energy intensive industries across the economy looking to cut carbon emissions and increase operating efficiency.

“The new fuel supply chain has been smooth and reliable thanks to a long-term supply contract with wood pellet manufacturer, Nature’s Flame. “Changes required to the actual boiler itself were relatively modest. The main focus has been on boosting fan capacity in the boiler to increase combustion, improvements to the exhaust stack to capture fine particulates and covering the fuel reception area to keep the wood pellets dry.”Unlike coal, wood pellets are hydrophilic and do not perform well when wet.”

Operationally there have been a number of efficiency benefits in switching from coal to wood pellets. Whereas coal has approximately 30 per cent moisture content, the pellets contain just 10 per cent. As a result, the plant used to require seven to eight truck deliveries per day for coal, and now requires five to six for wood pellets.

The pellets are more uniform in size than coal, enabling delivery into the boiler to be more automated and consistent. Adjustments were required to conveyor belts carrying the pellets and a solution was required to manage additional dust from the pellets.

Looking to the future

Kevin Liao said while the fuel switching project stacked up commercially from the time it was commissioned, increasing carbon prices would increasingly advantage the wood pellet plant. He said that additionally, the long-term domestic wood pellet supply chain looks positive as more and more forestry is being developed both to absorb carbon and deliver for the timber market.

As the world becomes increasingly concerned about climate change and the environmental impacts of the products they consume, Fonterra’s Te Awamutu project has shown what can be achieved with the right vision and commitment. The plant is setting new environmental standards in a sector that has traditionally been viewed as difficult to shift to renewable energy sources. In doing so, it’s also future proofing the plant and delivering better economic performance for shareholders.

The full case study can be viewed here

Source: EECA

Read More
Image

Kea Aerospace achieves milestone in autonomous flight

Kea Aerospace has successfully completed a landmark BVLOS (Beyond Visual Line of Sight) flight, demonstrating the capabilities of their advanced autonomous flight technology. The milestone UAS (Unmanned Aircraft System) flight, conducted within Kea Aerospace’s Special Use Airspace, marks significant growth ...
Read more
Image

€100 m investment in wood-based EV batteries

Stora Enso Oyj is preparing to invest about €100 million in a pioneering project to use wood in electric vehicle batteries and offer an alternative to components currently made in China, according to its chief executive officer. The funds would ...
Read more
Image

First long-range electric trucks to New Zealand

Windrose Technology will work with Auckland based Etrucks® to bring the first long-range electric trucks to New Zealand. The Windrose E1400 6×4 semi tractor features extreme aerodynamic efficiency, with an industry low coefficient of drag of 0.2755. Combined with the ...
Read more
Image

DC Equipment Canada return Madill to B.C.

DC Equipment has announced the opening of its new manufacturing facility in Prince George, marking the return of Madill equipment production to British Columbia. The first machines to be produced at this facility will be the Madill 3000B Log Loaders, ...
Read more
Image

QLD budget weak on future timber material needs for housing

Queensland’s peak body for the forest and timber industry is warning of a looming building materials crisis by a lack of policy and budget measures for increasing future timber supply to help meet the state’s rising housing demand. “While we ...
Read more
Image

Kenworth unveils futuristic SuperTruck 2

Kenworth showcased its SuperTruck 2 demonstrator vehicle at the Advanced Clean Transportation (ACT) Expo in Las Vegas last month, a project developed over six years in collaboration with the US Department of Energy’s (DOE) SuperTruck programme. The aim of the project ...
Read more
Image

Key drivers to decarbonise heavy transport fleets

The industry was buzzing once again for the Wood Transport & Logistics 2024 event that ran last week in Rotorua, New Zealand. Well over 200 forestry and log transport companies from across Australasia, America and Europe, came to Rotorua to ...
Read more
Image

Rocket Lab launches climate science satellites

Rocket Lab, a global leader in launch services and space systems, today launched the first of two back-to-back launches for NASA’s PREFIRE (Polar Radiant Energy in the Far-InfraRed Experiment) climate change-focused mission. ‘Ready, Aim, PREFIRE’ lifted-off from Rocket Lab Launch ...
Read more
Image

Hiringa launches hydrogen refuelling network

Taranaki-based green hydrogen developer Hiringa Energy has marked the opening of New Zealand’s first zero-emission green hydrogen refuelling network set to service heavy freight across the North Island. The initiative is the first of its kind in Australasia and was officially ...
Read more