Image

Risk posed by powerlines must be considered

30 September 2020

Any business conducting work near live powerlines must consider the risk they pose as part of its safety planning, says WorkSafe.

Logging company Mike Harris Earthmoving Limited was fined $100,000 at the Rotorua District Court on Friday after a worker suffered burns from an electric shock that left them without full use of their right hand.

In November 2018 Mike Harris Earthmoving Limited was using a forwarder, a vehicle used to pick up and transport logs, at a Rotorua site when the forwarder’s crane stopped working. The forwarder was then transported to an area on site to be repaired.

Once moved, the vehicle came in close enough contact with live powerlines for electricity to be conducted through the vehicle. As a result a worker who was holding a rail on the side of the machine at the time suffered a serious electric shock.

The worker suffered full thickness burns to his right foot and had to have two of his toes amputated. He also suffered full thickness burns to his right hand and has not been able to regain full use of his hand.

WorkSafe’s Acting Chief Inspector Danielle Henry said the incident left one person seriously injured but also put several others at serious risk.

“This work should not have been carried out near live powerlines. Before beginning repairs the company should have considered proximity to the powerlines and the potential for worker injury if the machine came into contact with live electricity.

“Mike Harris Earthmoving Limited didn’t have an area designated for repairs. This is a reminder to all businesses that the risk of powerlines must be considered. This company’s failure to do so has left a worker with life changing injuries.”

Notes:

  • A fine of $100,000 was imposed by the judge.
  • Reparation of $21,442 (in addition to $23,558 already paid) was ordered.
  • Mike Harris Earthmoving Limited was sentenced under sections 36(1)(a), 48(1) and (2)(c) of the Health and Safety at Work Act 2015.
  • Being a PCBU, having a duty to ensure so far as reasonably practicable, the health and safety of workers who work for the PCBU, while the workers are at work in the business, did fail to comply with that duty and that failure exposed individuals to a risk of death or serious injury from electrocution.
  • S 48(2)(c) carries a maximum penalty of $1,500,000.
Media contact details

For more information you can contact our Media Team using our media request form. Alternatively, you can:

Phone: 021 823 007 or Email: media@worksafe.govt.nz

Source: WorkSafe

Read More
Image

Kea Aerospace achieves milestone in autonomous flight

Kea Aerospace has successfully completed a landmark BVLOS (Beyond Visual Line of Sight) flight, demonstrating the capabilities of their advanced autonomous flight technology. The milestone UAS (Unmanned Aircraft System) flight, conducted within Kea Aerospace’s Special Use Airspace, marks significant growth ...
Read more
Image

€100 m investment in wood-based EV batteries

Stora Enso Oyj is preparing to invest about €100 million in a pioneering project to use wood in electric vehicle batteries and offer an alternative to components currently made in China, according to its chief executive officer. The funds would ...
Read more
Image

First long-range electric trucks to New Zealand

Windrose Technology will work with Auckland based Etrucks® to bring the first long-range electric trucks to New Zealand. The Windrose E1400 6×4 semi tractor features extreme aerodynamic efficiency, with an industry low coefficient of drag of 0.2755. Combined with the ...
Read more
Image

DC Equipment Canada return Madill to B.C.

DC Equipment has announced the opening of its new manufacturing facility in Prince George, marking the return of Madill equipment production to British Columbia. The first machines to be produced at this facility will be the Madill 3000B Log Loaders, ...
Read more
Image

QLD budget weak on future timber material needs for housing

Queensland’s peak body for the forest and timber industry is warning of a looming building materials crisis by a lack of policy and budget measures for increasing future timber supply to help meet the state’s rising housing demand. “While we ...
Read more
Image

Kenworth unveils futuristic SuperTruck 2

Kenworth showcased its SuperTruck 2 demonstrator vehicle at the Advanced Clean Transportation (ACT) Expo in Las Vegas last month, a project developed over six years in collaboration with the US Department of Energy’s (DOE) SuperTruck programme. The aim of the project ...
Read more
Image

Key drivers to decarbonise heavy transport fleets

The industry was buzzing once again for the Wood Transport & Logistics 2024 event that ran last week in Rotorua, New Zealand. Well over 200 forestry and log transport companies from across Australasia, America and Europe, came to Rotorua to ...
Read more
Image

Rocket Lab launches climate science satellites

Rocket Lab, a global leader in launch services and space systems, today launched the first of two back-to-back launches for NASA’s PREFIRE (Polar Radiant Energy in the Far-InfraRed Experiment) climate change-focused mission. ‘Ready, Aim, PREFIRE’ lifted-off from Rocket Lab Launch ...
Read more
Image

Hiringa launches hydrogen refuelling network

Taranaki-based green hydrogen developer Hiringa Energy has marked the opening of New Zealand’s first zero-emission green hydrogen refuelling network set to service heavy freight across the North Island. The initiative is the first of its kind in Australasia and was officially ...
Read more