featured image for Exoskeleton tech shows promise in protecting forestry workers

Exoskeleton tech shows promise in protecting forestry workers

4 August 2025

The same exoskeleton principles that protect grasshoppers, crabs and similar creatures could also help protect the 25,000 or so workers in the job with the highest injury and fatality rates in America, forestry.

“Forestry is vitally important to our economy and our standard of living, but its workers pay a high price, with an injury rate that is 40% higher than the average of all other industries and fatality rates that are 20 to 30 times higher,” said Jeong Ho “Jay” Kim, Ph.D., a systems engineering expert with the Texas A&M University School of Public Health.

In a recent study, Kim and co-author Woodam Chung, Ph.D., a forest engineer at Oregon State University, were the first to objectively measure biomechanical stress experienced by professional timber fellers during actual timber felling operations. They also evaluated forest workers’ perceptions of wearable exoskeletons — emerging technology already being used in other physically demanding industries such as shipbuilding and automotive and aerospace manufacturing.

Kim said that most forestry injuries and fatalities are associated with manual timber felling with a chain saw and related activities such as delimbing and cutting felled trees into logs and other smaller pieces. These activities require forceful exertions, awkward postures, repetitive motions and hand-arm vibrations. As a result, more than 70 percent of forestry workers experience work-related musculoskeletal disorders, primarily in their shoulders and lower backs.

These risks are magnified by the isolated, rugged conditions in which this work takes place — often on terrain with unstable footing and unpredictable weather, Kim said.

Kim and Chung’s work was supported by the Economic Development Administration and National Institute for Occupational Safety and Health and published in the International Journal of Forest Engineering.

Study participants were recruited as a convenience sample through local forest industry partners, the Pacific Northwest Agriculture Safety and Health and USDA Forest Service District Offices in Oregon and Idaho.

The study had two parts. First, to identify the types of exoskeletons that would be most appropriate and beneficial, the researchers measured the biomechanical stress levels of 10 currently employed professional timber fellers — nine men and one woman, all age 21 or older — who performed manual timber felling while wearing sensors.

Inertial measurement unit sensors were placed on the participants’ torsos (the midpoint of sternum) and the outside of both arms directly below the shoulder. As the participants worked their shifts of three to four and a half hours, all three sensors continuously synchronised via Bluetooth and saved the data. When the work shifts were completed, the researchers removed the sensors and saved the data into a cloud server.

These participants also completed a paper survey that assessed how much they knew about exoskeletons, how accepting they were of the concept, and their perceived barriers and risks of using exoskeletons. In addition, another 12 currently employed foresters (all men) took the same survey online.

More >>

Source: Texas A&M University

More Posts

Image

RoadEng 12 brings smarter AI to NZ forest road design

Softree Technical Systems released RoadEng Version 12, with new tools for forest road design. Path Explorer AI, which searches the terrain for the best location for a new forest road, can now work around the roads, landings and crossings engineers ...
Read more
Image

FPInnovations pilots autonomous log hauling in Alberta

FPInnovations has completed a pilot project in Hinton, Alberta, testing how autonomous trucks could be integrated into forest operations. The trial was conducted with forestry company West Fraser and autonomous vehicle technology provider Kodiak AI. Over two weeks of testing, ...
Read more
Image

Improved safety at SCA’s terminals with AI

Sweden-based SCA, Europe’s largest private forest owner, is introducing AI-based camera systems to improve safety at its wood terminals, sawmills and industrial sites following a group-wide pilot project at Torsboda and Töva. The initiative focuses on common vehicle-related risks, including ...
Read more
Image

Fortescue adapts robots for 6mw electric truck chargers

Decarbonising heavy transport is a massive hurdle across resource-intensive sectors, and mining giant Fortescue is pushing the boundaries of what is possible. Facing a complete lack of commercially available tech for off-grid ultra-fast charging, the company has adapted automotive welding ...
Read more
Image

HarvestTECH programme looks at the realities of forestry operations

From high-production logging and automated harvesting to paperless operations and AI-assisted transport planning, the HarvestTECH & Wood Transport Logistics 2026 programme covers a mix of new technology and practical experience from the field. The programme for the 10–11 November event ...
Read more
Image

Joystick Trades: how gaming skills are transferring to New Zealand’s high-tech workforce

Years spent gaming may be giving some young New Zealanders an unexpected head start in the modern trades, as automation, robotics and digital technology transform traditional workplaces. Industry training organisation Competenz has coined the term Joystick Trades after hearing the ...
Read more
Image

The timber industry’s decarbonisation pathway

Australia’s energy transition is reshaping the economy. The latest Intergenerational Report 2026 and FWPA’s Building a Low-Carbon Future for Australia point in a similar direction, consistent with a transition beyond net zero. The Intergenerational Report’s projections point to a renewables-dominated ...
Read more
Image

Plans for WA’s first electric freight network

Perth-based logistics giant Centurion is backing plans to build the first electric heavy freight charging network in Western Australia, which would comprise an initial three 12-bay charging networks between Perth and Bunbury to the south. The freight network is the ...
Read more
Image

Untapped wood from forestry to help fuel NZ industry

The country’s supply of sustainable wood fuel is ramping up with work underway to capture previously unused forestry material and investigate new wood energy manufacturing plants.   “When businesses are looking at energy options, woody biomass could provide an economic alternative ...
Read more
Image

From AI to heavy machinery: What’s on at HarvestTECH & Wood Transport Logistics 2026

Forestry operations are under pressure from all directions – rising costs, tighter margins, changing workforce requirements and growing demands for greater efficiency and safety. That makes the practical side of technology increasingly important. What is actually working in the forest? ...
Read more
Image

Caterpillar is bringing to AI deployment what it learned from automating mining

Nearly every company that’s trying to deploy artificial intelligence runs into the same problem: it’s hard to integrate the tech into everyday operations. Industrial heavyweight Caterpillar has spent decades dealing with a version of that problem in the physical world, ...
Read more
Image

Free program to help SMEs advance AI and digital tech ideas in Queensland

The free eight-week online program, delivered by Australia’s national science agency, CSIRO, helps businesses turn early-stage ideas into actionable R&D plans while building connections with expert facilitators and researchers. Offered through the Queensland Government-funded Regional University Industry Collaboration (RUIC) program, ...
Read more
Image

Tairawhiti – Productivity is bigger than the crew

Tony Hill of Hill Logging picked me up at 6:00am for a visit to his steep country winch-assist (SWY) operation east of Mangatu Forest. Many readers will know Tony through his role as NZ Logger Magazine’s “Iron Tester”. Tony comes ...
Read more
Image

Next generation of Komatsu forestry machines

Komatsu Forest presents a new generation of forestry machines, where both harvesters and forwarders have been comprehensively updated to meet the evolving demands of modern forestry. The new range combines improved productivity with reduced environmental impact, focusing on efficiency, operator ...
Read more
Image

Enforcement data reveals where forestry needs to lift its game

Strengthening organisational capability, planning, supervision and risk management remains one of the forestry sector’s biggest challenges, according to new enforcement data released by WorkSafe New Zealand. During the 2025/26 business year, WorkSafe conducted 526 assessments across the forestry industry. One ...
Read more
Image

Learning Through the Storm: Report released

The Top of the South Wood Council, with support from Te Uru Rākau – New Zealand Forest Service, has recently released  Learning Through the Storm, a report on the widespread windthrow caused by the severe storm events of 2025.  On July ...
Read more
Image

Testing New Zealand’s first heavy electric loader

A Volvo L120 Electric wheel loader is helping PermaPine test what sustainable equipment can really deliver in one of New Zealand’s most demanding timber processing environments. Set on a 100-acre site outside Taupō, PermaPine is New Zealand’s largest manufacturer of ...
Read more
Image

New Canopy Class certification raises the bar for contractors

When Skipps Logging became one of the first contractors to achieve Safetree’s new Canopy Class certification recently, they celebrated the win with a special presentation in Cambridge. The certification, which Skipps helped pilot, is designed to recognise contractors who demonstrate ...
Read more
Image

Forestry confirms new training partnership with Competenz

New Zealand’s forestry sector has confirmed it will align its workplace vocational training with the new Engineering and Manufacturing Private Training Establishment (PTE), operating under Competenz. The decision follows extensive consultation with employers, contractors and training providers, led by the ...
Read more
Image

Recent spike in log truck & trailer rollovers

Recent industry discussions and safety incident data have highlighted a concerning increase in log truck and trailer rollover events across New Zealand. Industry leaders, Forest Owners, Transport Operators, and the Log Transport Safety Council (LTSC) have acknowledged that this trend requires ...
Read more
Image

Driver fatigue: What half a billion kms has taught us

The launch of Transporting New Zealand’s Fatigue Management: Road Freight Update at their recent 60th Anniversary Conference provides an opportunity to reflect on how our understanding of driver fatigue is evolving. AutoSense was proud to support the report because it brings together ...
Read more