Image

Cut surfaces as fingerprints – marker-free tracing of logs

1 February 2024

Until now, reliably tracing logs to their origin has been difficult to achieve. Researchers at Fraunhofer IPM and their partners have now shown that logs and trunk sections can be identified based on the structure of the cut surfaces. The recent research project developed a marker-free and tamper-proof method. The optical method allows up to 100 percent recognition – even under the rough environment conditions of the timber industry.

Timber is a valuable natural resource, and its role – particularly in the construction industry – is increasing. One objective of the EU timber regulation is to curb illegal timber trade. This is why the regulation requires wood-processing companies to ensure that timber can be traced to its origin along the entire supply chain. The numbering tags, RFID codes and simple colour markings commonly used for identifying timber cannot ensure a reliable proof of origin because they are not tamper-proof. So far, alternative methods of marking logs and trunk sections have failed due to high costs and a lack of digitalization.

Tamper-proof identification: Cut surfaces as fingerprints

Fraunhofer IPM has been collaborating closely with the Forest Research Institute Baden-Württemberg (FVA) to develop a camera-based tracing method. The research project for the identification of logs and trunk sections has recently been concluded. The Track & Trace Fingerprint method uses the unique structures on cut surfaces like a fingerprint, meaning that no timber marking is required.

High-resolution camera images of the cut surfaces are translated into a simple bit sequence, the fingerprint code. This code is matched with a unique ID and stored in a Cloud database. Tracking can thus be achieved by comparing new images of the same area with the corresponding bit sequence. This allows the tamper-proof identification of individual logs and trunk sections, even if the timber is mixed up during harvest and processing.

Three different camera systems have been developed for wood processing applications, each to suit specific lighting conditions: a system that is integrated in a forest harvester, a system for use in a sawmill and a hand-held system. There are two reasons why the creation of fingerprint codes generates a vast amount of data: first, the specific structure of the cut surface with knots, growth rings and rough surfaces, and second, the forest environment, which makes the reproduction of log positions impossible. This is why the images are pre-selected in a two-step process using a convolutional neural network (CNN).

High recognition rate

In a field study, the researchers could show that the fingerprint method is reliable, even in the rough environmental conditions in the forest and the sawmill. A total of 65 cut surfaces were recorded on the forest harvester, at the timber collection point and at the sawmill. The registered sections were then identified at the collection point and at the sawmill by new images being taken at each location respectively.

The recognition rate between the forest harvester and the timber collection point was 98.5 percent, in other words the system failed to recognize only a single log. Between the forest harvester and the sawmill, and between the timber collection point and the sawmill, the recognition rate was 100 percent. In the future, the researchers will be working on making the method suitable for other types of wood and for applications along the entire timber processing chain.

Source: www.ipm.fraunhofer.de

Read More
Image

Kenworth unveils futuristic SuperTruck 2

Kenworth showcased its SuperTruck 2 demonstrator vehicle at the Advanced Clean Transportation (ACT) Expo in Las Vegas last month, a project developed over six years in collaboration with the US Department of Energy’s (DOE) SuperTruck programme. The aim of the project ...
Read more
Image

Key drivers to decarbonise heavy transport fleets

The industry was buzzing once again for the Wood Transport & Logistics 2024 event that ran last week in Rotorua, New Zealand. Well over 200 forestry and log transport companies from across Australasia, America and Europe, came to Rotorua to ...
Read more
Image

Rocket Lab launches climate science satellites

Rocket Lab, a global leader in launch services and space systems, today launched the first of two back-to-back launches for NASA’s PREFIRE (Polar Radiant Energy in the Far-InfraRed Experiment) climate change-focused mission. ‘Ready, Aim, PREFIRE’ lifted-off from Rocket Lab Launch ...
Read more
Image

Hiringa launches hydrogen refuelling network

Taranaki-based green hydrogen developer Hiringa Energy has marked the opening of New Zealand’s first zero-emission green hydrogen refuelling network set to service heavy freight across the North Island. The initiative is the first of its kind in Australasia and was officially ...
Read more
Image

Lidar technology for scalable forest inventory

Evaluating the trade-offs between the various platforms. When considering Lidar technology for forest inventory, it is essential to evaluate the trade-offs of each platform. This article provides some pointers. There is a critical need for rapid, rigorous, reproducible and scalable ...
Read more
Image

Remote-controlled firefighting technology demoed

BurnBot, an innovative firefighting technology, has been successfully demonstrated in Incline Village, Nevada. These remote-controlled machines can quickly clear vegetation, reducing wildfire risk. In just 2-3 days, BurnBot cleared 75% of the vegetation on 22 acres – a task that would take ...
Read more
Image

Hyne Group further expands

The Hyne Group is now pleased to announce the further expansion of this new operating division, with the acquisition of Express Pallets and Crates (Express), based at Narangba near Brisbane. Express has been in operation for some 35 years, under the ownership and ...
Read more
Image

FWPA Report: Transforming softwood timber verification

Forest & Wood Products Australia (FWPA) is pleased to share new research introducing biased position testing as a cost- effective and efficient method for the verification of structural softwood timber properties.  This innovative approach can unlock significant cost savings and improved efficiency ...
Read more
Image

Heli-saw to ‘transform’ tree-trimming around power lines

New Zealand’s electricity sector could be transformed by a radical new approach to keeping trees off power lines, says a King Country-based energy distributor. The Lines Company (TLC), based in Te Kūiti, has undertaken its first successful trial of the heli-saw – a ...
Read more