Case Study – Using spatial data for tree health

24 January 2024

As one of the world’s top ten forested countries, Australia relies on growers to manage productive, healthy forests sustainably for generations to come. HQPlantations is part of Australia’s plantation timber industry, which includes the forest, wood, and paper products sector – Australia’s sixth-largest manufacturing industry. 

Aerometrex has been a trusted provider of geospatial data to the company and continues to work with them on a range of use cases. Highlighted below is a case study that showcases some of HQPlantations’ key challenges and demands from a spatial data perspective, which Aerometrex has worked collaboratively to provide solutions for.

The Requirement

As plantation growers, HQPlantations are faced with a range of multi-faceted challenges that relate to better understanding the environmental and commercial state of the forest they manage. 

A primary interest is the commercial value of the wood within the plantation estate, accounting for representative growth rates and the overall health of the trees. These investigations must be undertaken cost-effectively at scale and inform management strategies to ensure the long-term sustainability of the land they have stewardship over. 

The Solution

To generate a three-dimensional model of the forests across HQPlantations’ estate, Aerometrex designed a bespoke aerial survey that would produce foundational data that meets the requirements of their operational needs. 

Key to the suitability of the solution was the very high point density of the LiDAR point cloud and survey design which meant every tree was captured from multiple viewing angles and imaged fully in three dimensions. This survey design gave HQPlantations the structural detail required to facilitate an assessment of the standing growing stock of their timber estate.

Aerometrex delivered LiDAR data that was classified so that HQPlantations could separate the ground surface from the trees and man-made infrastructure within their sites. This ensured that metrics derived from the LiDAR survey were representative of their managed timber trees and not biased due to misclassification. Aerometrex also delivered high-resolution aerial imagery, to be used by HQPlantations as a reference layer for remote site inspections.

The Result / Benefits

The datasets provided by Aerometrex enabled HQPlantations to extract the core metrics they require to understand the growth and commercial value of their managed forests at scale. 

General Manager of Resources at HQPlantations, Mark Jones says, “We have engaged Aerometrex to conduct a series of airborne LiDAR and imagery campaigns in recent years. This data has now become instrumental in the monitoring of changes to growing stock across our plantation estate. The data has also become increasingly important for the planning of forest operations as the business transitions to precision forestry.”

Various teams within HQPlantations have embraced the LiDAR data across a range of use cases. The derived forest structural information has enabled:

  • Generation of up-to-date approximations of the timber yield, considering the response to internal and external factors such as the introduction of new genetics or recent climate variations and inter-annual rainfall variations.
  • Individual tree detection for achieving a stocking count and potential mortality in younger age stands that haven’t yet hit canopy closure.
  • Updating of the detailed terrain information, allowing operational teams to identify the orientation of plantations, natural drainage lines, old site cultivation, ripping & mound contours, and thus aid planning activities such as harvesting events.
  • Supplementing of satellite imagery with high-resolution aerial imagery to pick up areas that may have been affected by weather events, e.g., scorched in a fire.
  • Greater reliance on airborne LiDAR data to supplement ground surveys, for volumetric calculations due to safety and scalability reasons.

Repeat captures shall also allow HQPlantations to have an ongoing and updated view of the younger stands between the ages of 3 to 10 years, to calculate metrics for growth models over time and predict more accurately how the estate shall grow and what it’s worth to their investors.


Projects such as these, provide growers like HQPlantations with clear commercial benefits, related to the increased efficiency in their monitoring operations which reduce the reliance on costly traditional boots-on-ground field surveys as well as increase the scalability of remote sensing solutions. Companies can utilise remote sensing applications to reduce costs and improve the accuracy, precision, and timeliness of plantation characterisation. This can help them as well as their contract partners focus on continuous improvement and innovation towards sustainable plantation management. 

About HQPlantations

HQPlantations is an Australian company operating out of Queensland having acquired plantations from the Queensland State Government in 2010. Today, they are Queensland’s largest plantation grower, managing a 310,000-hectare estate of forest and lands. 

About Aerometrex

Aerometrex (ASX: AMX) is an Australian company that specialises in aerial surveying and the generation of spatial data from LiDAR and imagery. Their high-density, coherent LiDAR and aerial imagery data can generate a wide range of datasets that describe topography, vegetation and infrastructure across the landscape and can help inform plantation strategies.

Source and image credit: Aerometrex

Read More

Kenworth unveils futuristic SuperTruck 2

Kenworth showcased its SuperTruck 2 demonstrator vehicle at the Advanced Clean Transportation (ACT) Expo in Las Vegas last month, a project developed over six years in collaboration with the US Department of Energy’s (DOE) SuperTruck programme. The aim of the project ...
Read more

Key drivers to decarbonise heavy transport fleets

The industry was buzzing once again for the Wood Transport & Logistics 2024 event that ran last week in Rotorua, New Zealand. Well over 200 forestry and log transport companies from across Australasia, America and Europe, came to Rotorua to ...
Read more

Rocket Lab launches climate science satellites

Rocket Lab, a global leader in launch services and space systems, today launched the first of two back-to-back launches for NASA’s PREFIRE (Polar Radiant Energy in the Far-InfraRed Experiment) climate change-focused mission. ‘Ready, Aim, PREFIRE’ lifted-off from Rocket Lab Launch ...
Read more

Hiringa launches hydrogen refuelling network

Taranaki-based green hydrogen developer Hiringa Energy has marked the opening of New Zealand’s first zero-emission green hydrogen refuelling network set to service heavy freight across the North Island. The initiative is the first of its kind in Australasia and was officially ...
Read more

Lidar technology for scalable forest inventory

Evaluating the trade-offs between the various platforms. When considering Lidar technology for forest inventory, it is essential to evaluate the trade-offs of each platform. This article provides some pointers. There is a critical need for rapid, rigorous, reproducible and scalable ...
Read more

Remote-controlled firefighting technology demoed

BurnBot, an innovative firefighting technology, has been successfully demonstrated in Incline Village, Nevada. These remote-controlled machines can quickly clear vegetation, reducing wildfire risk. In just 2-3 days, BurnBot cleared 75% of the vegetation on 22 acres – a task that would take ...
Read more

Hyne Group further expands

The Hyne Group is now pleased to announce the further expansion of this new operating division, with the acquisition of Express Pallets and Crates (Express), based at Narangba near Brisbane. Express has been in operation for some 35 years, under the ownership and ...
Read more

FWPA Report: Transforming softwood timber verification

Forest & Wood Products Australia (FWPA) is pleased to share new research introducing biased position testing as a cost- effective and efficient method for the verification of structural softwood timber properties.  This innovative approach can unlock significant cost savings and improved efficiency ...
Read more

Heli-saw to ‘transform’ tree-trimming around power lines

New Zealand’s electricity sector could be transformed by a radical new approach to keeping trees off power lines, says a King Country-based energy distributor. The Lines Company (TLC), based in Te Kūiti, has undertaken its first successful trial of the heli-saw – a ...
Read more