Image

Bushfire spread prediction model now operational

8 February 2022
Australia’s national science agency CSIRO and the NSW Rural Fire Service have released Australia’s most advanced model for predicting the speed and behaviour of eucalypt forest fires, helping to save lives and property during bushfires. Eucalypts make up more than 70 per cent of Australia’s forests and some of Australia’s most extreme fire events, such as the 2009 Black Saturday fires and the most severe of the 2019/20 bushfires, occurred in this type of vegetation.

The Vesta Mark 2 model, a mathematical description of how a fire responds to environmental conditions, is being rolled out nationally this summer and help fire control rooms across the country to predict and suppress bushfires as they spread across the landscape, and to warn the public.

CSIRO bushfire behaviour researcher Dr Andrew Sullivan said although much of eastern Australia was expecting a wetter than normal summer this year, bushfires were an ever-present danger throughout summer and were increasing in frequency and severity. “Forests have critical ecological and socio-economic roles, and often connect to areas where large numbers of Australians live,” he said. “Forest fires are complex and difficult to control and extinguish, and firefighters often have to battle steep terrain and challenging conditions just to reach the fire,” Dr Sullivan said.

“Critically, this model can accurately predict the speed that a fire front will advance across a landscape, which is essential to enable authorities to efficiently identify threats, issue bushfire warning messages, signal evacuations, and plan fire suppression actions.”

Data inputs such as forecast weather and wind information come from the Bureau of Meteorology, while information on the state of fuels within the forest and existing behaviour of a fire can come from vegetation databases and fireground reports. Fire behaviour analysts in an incident management team, often stationed at an operations centre near the fire, collate this information and then run the model to generate a prediction of the likely progression of the fire across the landscape.

CSIRO bushfire behaviour researcher and leader of the project Dr Miguel Cruz said the model used the latest available science on bushfire behaviour. “This model was built using analysis of the most extensive set of data gathered from observations of large high intensity experimental fires and wildfires, collated from around the country over the past 40 years,” Dr Cruz said. “Our research and findings during the 2019/20 bushfire season were also instrumental in the development of this tool.”

NSW RFS Deputy Commissioner Preparedness and Capability, Kyle Stewart, said the new model would be key to providing essential information about expected fire behaviour to support decision making during bushfire outbreaks this fire season. “Knowing with confidence where a bushfire will be ahead of time is critical to the safe and effective deployment of our fire crews and the safety of our communities,” Mr Stewart said.

“This is an excellent example of science agencies and the Rural Fire Service working together to improve bushfire management in Australia. It is the latest in a long line of successful collaborations between the RFS and CSIRO.” The original ‘Project Vesta’ in the 1990s was the largest ever experimental program studying forest fire behaviour in Australia.

Vesta Mk 2 has been incorporated into Spark, Australia’s newest wildfire operational simulator being developed by CSIRO and the Australasian Fire and Emergency Service Authorities Council AFAC, and Amicus, which is CSIRO’s bushfire knowledge support system to help support future bushfire fighting efforts.

A guide to the use and operation Vesta Mk 2 can be found here.

The scientific article about Vesta Mk 2 can also be accessed as an open access article from this link

Source: CSIRO

Read More
Image

New tool to manage forestry slash

Better management of forest felling waste has gained new impetus in Cyclone Gabrielle’s wake, with the sector firmly in the spotlight for the impact such waste has had on communities, ecosystems, and farmland downstream from harvest areas. Rotorua-based forest management ...
Read more
Image

New multi-species carbon calculator available

A new multi-species carbon calculator developed by Mark Kimberley and Michael Watt to support grower decision-making is freely available on the Forest Growers Research website ( Multi-Species Carbon Calculator (fgr.nz)). The calculator predicts growth metrics for eleven species that include ...
Read more
Image

JOUAV unveils advanced airborne Lidar sensor

JOUAV has released the JoLiDAR-1000 Lidar sensor designed specifically for uncrewed aerial vehicles (UAVs or ‘drones’) as the latest addition to its array of high-performance Lidar sensors for use in UAV applications such as GIS, surveying and precision powerline inspections. ...
Read more
Image

Wingtra debuts pioneering Lidar drone solution

Wingtra has unveiled its innovative Lidar-drone solution. The new Lidar payload is designed to seamlessly integrate the efficiency, ease of operation, and high accuracy of the WingtraOne GEN II drones with an advanced Wingtra-engineered Lidar sensor, offering notable advancements in ...
Read more
Image

Trimble and DroneDeploy improved UAV mapping

Trimble has unveiled the integration of the Trimble Applanix POSPac Cloud post-processed kinematic (PPK) GNSS positioning service, featuring CenterPoint RTX, with the UAV-based mapping and data collection capabilities of DroneDeploy’s reality capture platform. With the Trimble cloud positioning service, DroneDeploy ...
Read more
Image

Blue gum expansion & mechanised planting planned

Australia’s dwindling timber reserves could be exhausted in less than a decade, but industry experts are hoping a new native nursery in Western Australia could help ease the pressure. In the coastal city of Albany, 450 kilometres south of Perth, ...
Read more